brand-COMP CAMS

COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure ...

With a .500" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L Modular 4 Valve engines. COMP Cams Beehive Valve Springs deliver...

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is...

Providing the best sealing properties and spring clearance, viton valve seals are an excellent choice in performance applications. The 516 seals ha...

TheValve Lock 8mm Triple Groove for Gen III and IV HEMI feature a hardened Steel Lock. Same spring location accuracy as Super Locks without need to...

Our trunnion upgrade kit converts a stock LS series rocker arm into a captured trunnion for increased stability and stiffness. Compatible with stoc...

lock angle and .310" valve stem size and are recommended for all Race Applications.

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams Steel Retainers are the pe...

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams Steel Retainers are the pe...

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams Steel Retainers are the pe...

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams Steel Retainers are the pe...

These .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve spri...

These .030" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve spri...

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize ...

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4685 seat's 1.285" O...

Cam phasers are specially designed, computer-controlled Cam Gears that automatically optimize Camshaft timing based on the current engine rpm. Curr...

This rocker stud and nut assembly allows for improved clamping load, adding up to a more rigid, stable and high revving valve train assembly. Addit...

COMP Cams HEMI pushrod sets are a continuation of the Hi-Tech Pushrod line. These pushrods sets are engineered to provide optimal preload for speci...

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers. High Energy pushrod...

Precision-crafted from steel alloy then black oxided, this Hi-Tech checking pushrod is adjustable from 6.800" to 7.800" in .050" increments. Featur...

COMP Cams' part number 531-16, Positive Stop PTFE Valve Seals for Dodge 5.7/6.2/6.4L HEMI. Also available individually under part number 531-1.

While Cam phasers provide tremendous efficiency benefits, they also present some limitations when it comes to performance Camshafts. In turn, COMP ...

COMP Cams is proud to announce another industry first: a bolt-in-ready Bushed Shaft Rocker System for GM LS engines. Thanks to innovative engineeri...

COMP Cams Lash Cap 8mm - Single